CM60-U5B UHF
Price: $639.00 Inc GST
Quick Overview
- Multi Mode Functionality P25 Phase 1 and Analogue Conventional
- Most Compact P25 Mobile
- CAP Compliant
- DATA Models Available with Optional Interfaces such as ModBus, PacBus and DNP3 + AES256 Encryption
- Ask a question about this product
Professional analogue / P25 mobile radio
CM60 P25 local control mobiles, 5 watt UHF.
Base Unit
The CM60 base unit has been engineered and manufactured in Australia. GME has built a reputation for technical innovation within the Australia radio industry.
The CM60 series has 1072 channel capacity programmable in 50 zones. Incremental software license keys are available for P25 conventional, trunked and AES-256/DES encryption.
An optional FIPS 140-2 encryption module is also available with publicly listed API's for 3rd party integrators.
The CM60 models are available as dedicated P25 data and telemetry models using an AT terminal interface.
Remote Control models are compliant to AS/NZS 4295, AS/NZS 4365 (UHF models), FCC Parts 90/15 and conform to TIA-102 Standards.
5/1 watt switchable power
Compact design
APCO P25
CAP Approved
TIA-102 Class A Compliance
DES & AES Encryption
Features
- l
5/1 watt switchable power
Compact design
APCO P25
CAP Approved
TIA-102 Class A Compliance
DES & AES Encryption
Open A
Whats in the Box
- CM60 Transceiver
- Radio mounting cradle
- DC power lead
- User guide
Brochures and Manuals |
||
Owners Manual | ||
Product Brochure | ||
Available Accessories |
Specifications
GENERAL
|
|
Frequency Range TX | UHF Hi 450 to 520 MHz |
Number of Channels | 1072 |
Channel Spacing | , 12.5 kHz, 6.25 kHz |
Operation Mode | Simplex, Duplex in Analogue and P25 |
Antenna Impedance | 50 ohm |
Nominal Battery Voltage | 12 Volt |
Operating Voltage Range | 10.8 V to 15.6 V |
Battery Polarity | Positive |
Operating Temperature | -22 °F (-30 °C) to +140 °F (60 °C) |
Channel bandwidth: Analogue | VHF 38mHz UHF 70mHz |
Channel bandwidth: Digital | VHF 38mHz UHF 70mHz |
Channel stepping | 25 kHz, 12.5 kHz 6.25 kHz, 5 kHz, 2.5 kHz |
Zones | 50 |
Frequency stability | 1.5 ppm over -20 to +60 deg C |
Modulation | C4FM, FM, DC coupled, DSP audio processing |
MIL Spec | MIL SPEC 810 (Shock and Vibration) |
TRANSMITTER | |
RF Output | 25 W, 10 W, 5 W, 1 W selectable per channel |
Spurious Emission | -80 dBc |
Frequency Error | 1.5ppm -20 degrees C to +60 degrees C |
Modulation | C4FM, FM, DC coupled, DSP audio processing |
Current Consumption | TX: 5.0 A (VHF) 6.0 A (UHF) |
Transmitter duty cycle | 4:1 for 25 W output |
Deviation limiting: 12.5khz | 2.5 kHz at +20 dB AF limiting |
Audio response: 12.5khz | +6 dB/octave, + 1 dB/-3 dB 300 Hz to 3 kHz |
Audio distortion | 3% below limiting |
Residual noise and hum | -40 dB |
Adjacent channel power | -60 dBc |
RECEIVER | |
Selectivity | 64 dB NB, 74 dB WB |
Intermodulation Immunity | 75 dB |
Blocking Immunity | 100 dB |
Spurious Response Immunity | 75 dB |
Audio Output Power | 3 W into 4 Ohm |
Analogue | -122 dBm for 12 db SINAD unweighted |
Digital | -122 dBmC4FM for 5% BER |
Current consumption | RX muted: 350 mA, RX full audio: 1 A, |
RX max audio | 3 Watts into 4 ohms |
Conducted Spurious Emission | -80 dBm |
MECHANICAL | |
Dimensions | 1.14” (29 mm) H x 5” (127 mm) D x 6.4” (163 mm) L |
Weight | 22 oz (620 g) |
Antenna | 50 Ohm BNC (F) |
Microphone Port | RJ45 (F) |
Storage temperature | -22 °F (-30 °C) to +140 °F (60 °C) |
Ingress Protection rating | IP54 |