GME TX7200 UHF Handheld

Price: $485.00 Inc GST

Quick Overview

Wide band / Narrow band programmable by channel
Open and Group Scan Modes
ANI
Australian made

Ask a question about this product

TX7200 UHF 5 watt commercial handheld radio

A rugged Australian made hand held portable commercial radio

The TX7200 is built to last with a robust die-cast chassis and tough ABD/Polycarbonate construction.
Designed for simple 'no fuss' operation, the TX7200 comes as a simple six assignable soft key version.
The TX7200 is packed with high performance features which can be dealer programmed to meet the individual user's present and future requirements.

The TX7200 has a 125 channel capacity which can be further extended with all CBRS UHF channels. |
The TX7200 is powered by a high quality 1500 mAh NiMH battery pack.
Battery life is extended with an automatic receiver 'sleep' mode and 'quiet' mode. Audible and visual alarms warn the user of low batter voltage.

The TX7200 is 100% Australian made with ultra-miniature surface mounted components using the latest in solder reflow techniques
for high performance and reliability.
A rugged diecast metal chassis houses the circuit boards inside a tough polycarbonate case.
The TX7200 meets the MIL-STD810C/D/E standards for shock, vibration, humidity, dust and moisture.
An extensive range of accessories is available for the TX7200.

Connect the TX7200 to the MC001 Speaker/Microphone and the user has a fully featured Mobile installation.
The TX7000 can be used within any portable network and is the perfect partner for both the TX362000 and RP3800 repeater

Features

  • Wide band / Narrow band programmable by channel
  • Open and Group Scan Modes
  • User selectable channels per scan group
  • 5 Digit Selcall with Quiet Mode
  • 10 Selcall memories with alphanumeric tagging
  • ANI
  • Three level squelch setting
  • Priority channel key
  • Instant channel recall
  • CTCSS with silent mode
  • DTMF tones for PSTN connect
  • Selectable Hi/Low TX power
  • Battery level indicator
  • Monitor button
  • Quiet mode
  • Key lock
  • Surface mount technology
  • Australian made


Flexible Antenna
1500 mAh Ni-MH Battery Pack
Belt Clip

Supplied With

Spare Accessories
TX7200 UHF radio Antenna Replacement - Short AE7000
Antenna Battery 1500mAH NiMi BP003
1500 mAh Ni-MH Battery Pack Microphones Heavy Duty MC004
Belt Clip Light Duty MC001
Instruction Manual Belt Clips For BP003 MB027
For MC004 MCC004

Supplied With

Brochures and Manuals

Owners Manual
Product Brochure

Compatible Accessories

Specifications

GENERAL
Compliant Specification AS/NZS4295
Frequency Range TX 450 - 520 MHz
Number of Channels 124
Channel Spacing 25 kHz / 12.5 kHz
Operation Mode S implex or half duplex
Scanning Speed 40 ms per channel (25 channels per second)
Antenna Impedance 50 Ohms nominal
Nominal Battery Voltage 7.2 volts DC nominal
Operating Voltage Range 6 - 9 volts DC
Reverse Voltage Protection Shunt Diode
Operating Temperature -10° C to +60° C
Frequency stability ± 2.5 PPM
TRANSMITTER
RF Output High: 5 watts, Low: 1 watt
Spurious Emission < - 30 dBm
Modulation FM
Maximum Deviation < ± 5 kHz at + 20 dB limiting (25 kHz), < ± 2.5 kHz at + 20 dB limiting (12.5 kHz)
Transmit Frequency Response + 6dB per octave 300 Hz to 3 kHz, + 1, - 3 dB
RECEIVER
Intermediate Frequencies 1st: 21.7 MHz, 2nd: 450 kHz
Sensitivity - 121 dBm for 12 dB SINAD
Selectivity 65 dB (25 kHz), 60 dB (12.5 kHz)
Intermodulation Immunity 72 dB
Blocking Immunity 95 dB
Audio Output Power 0.5 watts at <10% distortion
Audio Signal to Noise > 45 dB
Audio signal to noise: 12.5Khz > 40 dB unweighted
Current consumption 1.8 amps @ 5 watts, 0.8 amps @ 1 watt
IF Frequencies 15 mA sleep mode, 45 mA muted, 190 mA full volume
MECHANICAL SPECIFICATIONS
Dimensions 135mm (W) x 63mm (D) x 40mm (H)
Weight 390 grams
Antenna TNC female