DBS6000 P25 Dual Band


Quick Overview

  • Mix and match frequency bands and power settings
  • Backward compatible with analogue
  • Single point of control usng the GME UIC600xC Contoller
  • 1024 channel, 50 zone
  • GPS interface with optional GME GPS1 antenna
  • 80 channel CB compliant in both UHF bands

    Ask a Question about this product

Professional analogue / P25 mobile radio

DBS6000 Dual Band Solution for cross band and analogue / P25 network applications

For dual network or digital migration applications

The DBS6000 Dual Band Solution gates any combination of two CM60 series mobiles using a single User Interface Control model UIC600B (black) or
UIC600G (high visibility green).

As a tailored client solution, the DBS6000 provides seamless access to independent two-way radio networks regardless of frequency and in any
combination of analogue, P25 conventional or P25 trunked configurations.
The user simply chooses the operational workgroup or channel from the single control head.

The DBS6000 represents a cost effective solution for all existing private, commercial and Government agency networks
and provides an economical network migration solution.

The DBS6000 is small, efficient and offers a range of vehicle installation options by coupling component radio hardware
into a single footprint mounting cradle.

A DBK6000 (kit) is also available as an after-market solution for all existing CM60 radios and can be fittred by any
of the strategic GME Professional Radio Partnerships.

All CM60 series radios are compliant with AS/NZS 4295, AS/NZS 4365 (UHF models), FCC Parts 90/15 and TIA-102 Codes

The DBS6000 and DBK6000 is a tailored solution based on selecting two of the following models and
single UIC600x control mcrcophone

DBS6000 model selctions

CM60-V25B - VHF 136-174MHz, 25 watt

CM60-UL25B - UHFL 403-480MHz, 25 watt

CM60-U25B - UHF 450-520MHz, 25 watt

CM60-UL5B - UHFL 403-480MHz, 5 watt

CM60-U5B - UHF 450-520MHz, 5 watt


UIC600B (black) or UIC600G (green)


  • Mix and match frequency bands and power settings
  • Single point of control usng the GME UIC600xC Contoller
  • 1024 channel, 50 zone
  • Operational in all Phase 1 CAI P25 feature sets
  • Backward compatible with analogue, or usable in cross band analogue mode
  • GPS interface with optional GME GPS1 antenna
  • RSSI Voting
  • User programmable function keys Channel profiles
  • 80 channel CB compliant in both UHF bands

Whats in the Box

  • DBS6000 Transceivers
  • Dual radio mounting cradle DBK-MB
  • Split feed DC power lead DBK-LE12V
  • Screw pack
  • User manual
  • Selected UIC600x controller microphone (green or black)
  • Data interface lead DBK-LEDAT
  • MB600 Mounting Bracket for UIC600x controller microphone

Brochures and Manuals

Owners Manual
Product Brochure

Available Accessories


Frequency Range TX VHF 136 to 174 MHz, UHF Lo 403 to 480 MHz, UHF Hi 450 to 520 M
Number of Channels 1072
Channel Spacing 25 kHz, 12.5 kHz, 6.25 kHz
Operation Mode Simplex, Duplex in Analogue and P25
Antenna Impedance 50 ohm
Nominal Battery Voltage 12 Volt
Operating Voltage Range 10.8 V to 15.6 V
Battery Polarity Positive
Operating Temperature -22 °F (-30 °C) to +140 °F (60 °C)
Channel bandwidth: Analogue VHF 38mHz UHF 70mHz
Channel bandwidth: Digital VHF 38mHz UHF 70mHz
Channel stepping 25 kHz, 12.5 kHz 6.25 kHz, 5 kHz, 2.5 kHz
Zones 50
Frequency stability 1.5 ppm over -20 to +60 deg C
Modulation C4FM, FM, DC coupled, DSP audio processing
MIL Spec MIL SPEC 810 (Shock and Vibration)
RF Output 25 W, 10 W, 5 W, 1 W selectable per channel
Spurious Emission -80 dBc
Frequency Error 1.5ppm -20 degrees C to +60 degrees C
Modulation 3% below limiting
Current Consumption TX: 5.0 A (VHF) 6.0 A (UHF)
Transmitter duty cycle 4:1 for 25 W output
Deviation limiting: 12.5khz 2.5 kHz at +20 dB AF limiting
Audio response: 12.5khz +6 dB/octave, + 1 dB/-3 dB 300 Hz to 3 kHz
Audio distortion 3% below limiting
Residual noise and hum -40 dB
Adjacent channel power -60 dBc
Selectivity 64 dB NB, 74 dB WB
Intermodulation Immunity 75 dB
Blocking Immunity 100 dB
Spurious Response Immunity 75 dB
Audio Output Power 3 W into 4 Ohm (internal speaker) or > 2 Watt using UIC600xC controller microphone
Analogue -122 dBm for 12 db SINAD unweighted
Digital -122 dBmC4FM for 5% BER
Current consumption RX muted: 350 mA, RX full audio: 1 A,
RX max audio 3 W into 4 Ohm (internal speaker) or > 2 Watt using UIC600xC controller microphone
Conducted Spurious Emission -80 dBm
Dimensions 1.14” (29 mm) H x 5” (127 mm) D x 6.4” (163 mm) L
Weight 22 oz (620 g)
Antenna 50 Ohm BNC (F)
Microphone Port RJ45 (F)
Storage temperature -22 °F (-30 °C) to +140 °F (60 °C)
Ingress Protection rating IP54
Display type 11 character hi contrast LCD on RH004 remote head or OLED using UIC600xC controller microphone
AES / DES encryption
AES / DES encryption AES/DES
GPS/AVL Option available