TX3510S

Price: $485.00 Inc GST

Quick Overview

Voice inversion scrambler
External speaker socket
Front and rear microphone input
Selcall (5 Tone)

Ask a question about this product

Compact fully featured UHF CB with ScanSuite

UHF radio powered by digital signal processing for Pure Sound

The compact fully featured 5 Watt TX3510S has an impressive list of advanced features. Including the latest in Digital Signal Processing technology,
Advanced Signal Management and Dynamic Volume Control, coupled with rugged construction, ease of installation and renowned GME reliability.
The TX3510S is now also equipped with ScanSuiteTM to enable uninterrupted communications even on congested channels.

Australian made GME radios now have a 5 year warranty.

Features

  • ScanSuite
  • Advanced signal management
  • Digital signal processing
  • Dynamic Volume Control
  • Full spectrum backlighting
  • Wide/narrowband receive filters
  • Voice inversion scrambler
  • CTCSS & DCS
  • Selcall (5 Tone)
  • Memory channel quick select
  • Open and group scan mode
  • Selectable priority channel
  • Active channel transmit in scan
  • Adjustable squelch control
  • Rotary channel selector
  • Rotary volume control
  • Digital signal strength meter
  • External speaker socket
  • Front and rear microphone input
  • Die-cast chassis
  • Slide-in mounting cradle

Supplied With

  • TX3510S UHF CB Radio
  • Mounting Cradle
  • Microphone
  • Microphone Clip
  • DC Lead
  • Screw Pack
  • Instruction Manual

Brochures and Manuals

Owners Manual
Product Brochure

Compatible Accessories

Specifications

General
Compliant Specification Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.
Frequency Range TX 476.425-477.4125 MHz
Number of Channels 80
Channel Spacing 12.5 kHz
Operation Mode Simplex or half Duplex with repeater talk around.
Scanning Speed 50 ms per channel (20 channels per second).
Antenna Impedance 50 Ohms nominal
Nominal Battery Voltage 12 volts DC
Operating Voltage Range 10-16 volts DC
Battery Polarity Negative Earth
Standard Test Voltage 13.8 volts DC
Overvoltage Protection 30 volts DC maximum. At 18 volts DC the channel display flashes ‘Hi DC’ for 5 seconds on receive. The RF power is reduced and TX flashes on transmit.
Reverse Voltage Protection Diode Crowbar
Overcurrent Protection In-line 2 Amp Fuse
Operating Temperature -10°C to 60°C
TRANSMITTER
RF Output 5 watts
Spurious Emission < - 70 dBc
Frequency Error < ± 1.5 kHz
Modulation FM
Maximum Deviation < ± 2.5 kHz at + 20 dB limiting
Transmit Frequency Response +6 dB per octave 300 Hz to 3 kHz +1-3 dB
Demodulated Audio Signal to Noise > 45 dB unweighted
Current Consumption 1.7 Amps with 50 Ohm termination
RECEIVER
Intermediate Frequencies 38.85 MHz, 450 kHz
Sensitivity - 123 dBm for 12 dB SINAD unweighted
Selectivity - 6 dB at + 3.5 kHz, - 60 dB at ± 12.5 kHz
Intermodulation Immunity -72 dB
Blocking Immunity -98 dB
Spurious Response Immunity 70 dB
Audio Output Power 3 watts average into 4 Ohms
Audio Signal to Noise > 45 dB unweighted
Current consumption < 175 mA muted 750 mA Full volume.
Conducted Spurious Emission < - 70 dBm
MECHANICAL SPECIFICATIONS
Dimensions 29 (H) x 128 (L) x 117 (D) mm
Weight 450 grams
Antenna SO239 panel socket
External Speaker 3.5 mm mono jack
Microphone Port 6 Way telephone style with rubber strain relief